-
Step 1
Cut 3 strips of rope from the P2469 SEA CHANGE (reverse) patterned paper.
-
Step 2
Adhere the rope strips to your background P2470 BOARD WALK in selected areas.
-
Step 3
Adhere the barcode strip from P2469 SEA CHANGE 5mm from the left edge of your background.
-
Step 4
Adhere a strip of Latte pearls flush next to the barcode strip.
-
Step 5
Adhere a piece of rope next to the rope paper strip. Use a sewing machine and sew over the rope piece to add some more texture and pattern.
-
Step 6
Cut out 5 x hexagons shapes from P2469 SEA CHANGE patterned paper and adhere to your background.
-
Step 7
Matt your photo and adhere overlapping the hexagon shapes. Tuck some of the sea weed elements from the Collectables packet under the right-hand side of your photo.
-
Step 8
Use elements from the Collectables packet and adhere them as per the sample. Punch a circle from the P2477 WAVE BREAK paper and use in between the other elements. Use foam tape to adhere some of the elements to add dimension.
-
Step 9
Add sewing around the outside edges of some of the hexagons shapes.
-
Step 10
Add colour to your wooden flourish using 2 shades of blue ink. Once dry and dimensional glaze and sew to your layout.
-
Step 11
Finish off your layout with ink splats, diamante and pearls.
Products Used
- Kaisercraft Beach Shack P2470 BOARD WALK, P2469 SEA CHANGE, P2477 WAVE BREAK
- Kaisercraft IT 461 Stencil
- Beach Shack Collectables
- Beach Shack Stamp
- Cardstock
- PL 505 Latte Pearls
- Other: diamante, rope, sewing machine, embroidery thread, blue inks, dimensional glaze
